Is there a limit to how many features I can cut in Alibre CAM?
I have a design with 200 slots to be cut with an 8mm tool and 400 slot ends to be cleaned with a 4mm tool. I initially checked with one slot and two ends and the software was fine ie the model can be machined.
When I try 400 ends I now get an error that says "Could not find valid data! Internal algorithm failure". When I okay this error the next error is "Error creating toolpath! Please check settings and input parameters".
If I now go back and sketch just a single slot in the same model and try and CAM this I receive the same error message. That is I was able to intially machine a design, when I grew it to 400 slots it failed, and it now fails even when I try to cut just a single piece of the model.
Any suggestions?
I have a design with 200 slots to be cut with an 8mm tool and 400 slot ends to be cleaned with a 4mm tool. I initially checked with one slot and two ends and the software was fine ie the model can be machined.
When I try 400 ends I now get an error that says "Could not find valid data! Internal algorithm failure". When I okay this error the next error is "Error creating toolpath! Please check settings and input parameters".
If I now go back and sketch just a single slot in the same model and try and CAM this I receive the same error message. That is I was able to intially machine a design, when I grew it to 400 slots it failed, and it now fails even when I try to cut just a single piece of the model.
Any suggestions?