Geomagic Design 3D CAD modelling and Mecsoft Visual Mill CNC software - local Australia technical support.

Moderators: caddit, progeCAD.de, Moderators

#1187 by Leon
Fri Jul 23, 2010 7:52 am
Hi

(not sure if nesting is strictly the right term). I have a part to profile out of acrylic sheet. The part has several internal holes that need to be milled before the outside is cut (eg the gasket example in the sample tutorial that comes with CAM 2.0).

Can the internal holes be forced to cut before the outer profile? Or do I have to have these on separate sketches?

Thanks

#1190 by Leon
Mon Jul 26, 2010 12:40 am
I have played around more with the Flat Area Selections and I can now choose to pocket holes before I profile the edges. However, when I go to profile the edges, it still wants to go inside and profile the internal holes that I previously cut using the Hole Pockets.

(As an example, consider the gasket example or a simple flat washer. I need to cut the centre material away first before I cut the outside profile. When I cut the outside profile I want to avoid going back inside to try and re-cut the inner circle a second time - the part is now loose from the stock and would be damaged if I recut it.

Is there a way that I can select only the outside edges of the profile to be cut and to ignore the inner features?

Thanks

#1191 by Leon
Mon Aug 02, 2010 5:23 am
Any ideas on this?

I have tried putting the internal holes on another sketch and then setting them as Avoid Regions when I try and machine the outer regions but it still wants to machine the internal holes a second time

Even if I were to get the internal holes working on a separate sketch it does seem a bit complex - I would assume that there would be some option to just cut the internals first.
#1193 by caddit
Tue Aug 03, 2010 2:09 pm
Hello Leon,


Sorry about the delayed response.

In Alibre CAM, a contour operation uses CAD sketch information as the basis of what to cut in CNC. If you look closely at the gasket example which you mention earlier, you will indeed see that the two different profile cuts are indeed created from two different sketches.

It helps to design your parts with CAM in mind to start with, in other words.

Another possibility would to create "avoid regions" over the holes and include them in a second op. Maybe try that and see if it helps?

#1198 by Leon
Wed Aug 11, 2010 1:48 am
Thanks Ben. I see your point about sketching with the machining features in mind from the start. Is there an easy way to insert a new sketch? I seem to get a request sometimes after saving to insert a new sketch or edit a new one but I am not sure how to get this command when I want it!

Regards
#1199 by caddit
Thu Aug 12, 2010 1:40 am
Hi Leon,


How to create a new sketch? You can create a new Alibre sketch any time, by clicking on the "sketch" icon Image, pick a planar reference and begin a new sketch, while in either CAD or CAM browser mode..

This icon is located by default toward the top right of the drawing window.

#1200 by Leon
Thu Aug 12, 2010 2:16 am
Ah, I see what is happening. When I tried this before I was expecting it to say "Do you want to add a new sketch or edit an existing one". I now see that you just click this and start drawing and it adds "Sketch 2" to the browser after you have commenced drawing....

Cheers :D

Recent Topics

User avatar Reloading ProgeCad2016

by caddit

Wed Apr 05, 2017 11:33 pm

Default Avatar Start ProgeCad by C# dll Error

by ftauto

Mon Mar 20, 2017 3:44 pm

User avatar Mathcad Prime 4.0 Released

by caddit

Wed Mar 08, 2017 10:40 pm

User avatar Lisp routine help

by caddit

Wed Mar 08, 2017 10:30 pm

Default Avatar Classic/Ribbon menu help

by SClapham

Sun Feb 19, 2017 11:04 am

Twitter

About Us

Welcome to Ausstralia/New Zealand's CADDIT CAD software forum. CAD CAM Forum for support and discussion regarding AutoCAD, progeCAD IntelliCAD, Geomagic Freeform, Mathcad, CNC software.

This forum offers free support for progeCAD by qualified technical staff. Thank you for visiting.

CADDIT.net

The CADDIT.net team