MATHCAD, Geomagic Freeform, Mecsoft VisualCAM & CAD CAM CNC software support discussion forum. Moderated.

Moderators: caddit, evanish, Moderators

#405 by Proformance
Sun Jan 18, 2009 12:35 pm
Downloaded the Doplhin cadcam trial (Free) software, but the FIRST thing i tried to do (import DXF files) FAILED with an ERROR.


Partmaster CAD is not installed (or has never been run) on this system. Please run PartMaster CAD before trying again. You may need to re-install the software.

Please help

I hope this software is not full of bugs. I just purchased some vinyl cutting and engraving software for another part of my business and it was FULL OF BUGS and kept crashing and would not work with all my DXF Files.

Please reassure me this software is ok,


Scott - Proformance Hummer Racing
#406 by caddit
Mon Jan 19, 2009 1:08 am
Hi Proformance,

You can relax, PartMaster CNC is actually quite reliable software for what it does.

The error you get comes from trying to run PartMaster CAM (dcam.exe) before ever first running PartMaster CAD (dcad.exe).

The Dolphin PartMaster CNC software package includes several individual programs. It sounds like you ran "PartMaster CAM" to get this error. Try doing what the error message implies - run the "PartMaster CAD" icon first. Then see if your error goes away ;)

#407 by Proformance
Mon Jan 19, 2009 1:18 am
Thanks for your reply,

Tried to run CAD then CAM, same error.

Loaded the software again - same error

Loaded the software onto another PC, Ran CAD First, then CAM - Same error.
#410 by caddit
Mon Jan 19, 2009 2:20 am
Hi Proformance,

You need to clean up your DXF file and select the cutting geomtry before CAM will understand what is included in the job, maybe that is what it is asking for. Please have a look at these video examples and see if they are any help:

Recent Topics

User avatar Reloading ProgeCad2016

by caddit

Wed Apr 05, 2017 11:33 pm

Default Avatar Start ProgeCad by C# dll Error

by ftauto

Mon Mar 20, 2017 3:44 pm

User avatar Mathcad Prime 4.0 Released

by caddit

Wed Mar 08, 2017 10:40 pm

User avatar Lisp routine help

by caddit

Wed Mar 08, 2017 10:30 pm

Default Avatar Classic/Ribbon menu help

by SClapham

Sun Feb 19, 2017 11:04 am


About Us

Welcome to Ausstralia/New Zealand's CADDIT CAD software forum. CAD CAM Forum for support and discussion regarding AutoCAD, progeCAD IntelliCAD, Geomagic Freeform, Mathcad, CNC software.

This forum offers free support for progeCAD by qualified technical staff. Thank you for visiting.

The team