progeCAD support, tips and troubleshooting forum. progeCAD works very similar to some versions of AutoCAD. Moderated.

Moderators: caddit, Moderators

#663 by seasdes
Sun Jun 07, 2009 12:57 pm
All of my drawings use ctb print tables. How can I make the drawing use a stb table rathe than a ctb table.

Also I have a drawing that does not use a print table. How can I apply a desired print table to the drawing.
Seasdes
#665 by caddit
Tue Jun 09, 2009 8:42 am
Hello seasdes,


There are a couple of progeCAD commands documented in the F1 help relevant for changing the print style table types:

The "convertpstyles" command can convert the drawing to use the other type of print style table. Remember that a drawing can use one type of print style table at a time. Check this command out in the searchable help :)

The "convertctb" command will actually convert an STB (Named Plot Style table) into a CTB (Color-Dependent Plot Style table).

Also, the PSTYLEMODE system variable will tell the user which print style table type is being used for the current DWG drawing file.

Let us know how you go with using these commands please.

#741 by nmunoz
Thu Aug 27, 2009 12:01 pm
hi
Just want to thank you for posting this query.
I found the reply a success - Thank You
Cheers